108-Universal Plastic, Breathable, Interior Wall Paint
Availability: In stock
› Suitable for wiping
› High covering capacity
› Mat plain appearance
› Highly decorative with good dispersion
› Vivid and permanent colors
› Outstanding whiteness
Water-based, acrylic emulsion based decorative flat interior surface paint.
Resists to chemical and physical effects, decorative interior surface paint that ejects humidity with its breathing capability.
Areas of Usage
Used in construction materials such as plaster, concrete, chipboard, etc. inside the buildings.
Manner of Application
Mix well before application. Apply with brush or roller. Based on the condition of the application surface, thin with 15-20% of water.
Applied between the temperatures of +5 °C and + 30 °C. After the oil, dust and swelled old paint on the application surface are completely cleaned and the required dryness is ensured, FEC Insulating is entirely applied on weak surfaces after being thinned with 1/7 of water. After the surface is coated with water based FEC Primer Coat 1 day later, painting process starts. There should be at least a-2-hour-break between layers. (In +20 °C).
In + 20 °C, Do not touch for: 1 hour Solid drying: 24 hours
1 liter of paint covers 7-9 m² and 1 kg of paint covers 4-6 m² on one layer (28 ± 5 mic) based on the surface.
20/1, 10/1, 3,5/1
Standard color chart and desired color.
Suitable for at least 1 year storage in its original sealed pail with the lid seals air tight and without exposure to the sunlight or freeze (between +5 °C and + 35 °C). Large packages should be stowed 5 pieces most, and small packages should be stowed 8 pieces most during the storage and transportation. Use the handles for carrying the pails.
S2 Keep out of the reach of the children. S24 Avoid contact with skin and skin. S25 Avoid contact with skin and eyes. S46 If swallowed, seek medical advice immediately and show this container or label.
Density 1,62 ± 0,05 PH 8 ± 0,5 Viscosity 125 ± 5 ku
High coefficient of friction Class - 3 Covering Capacity Class - 1 (4 m²/L) Brightness Class G-3 Mat Smallest Particle S-1 Resistance Against Development of Mould K-2 General Purpose