107- Super Plastic, High Covering Ability, Breathable Interior Wall Paint
Availability: In stock
› Suitable for wiping
› Mat plain appearance
› High covering capacity
› Highly decorative with good dispersion
› Vivid and permanent colors
› Outstanding whiteness
Acrylic copolymer binder, water based decorative mat interior surface paint.
Seamlessly adheres to all kind of surfaces, does not crack or pour, works as a special ceiling and interior paint and coat with its high covering capacity and whiteness.
Areas of Usage
Used in all kind of construction materials such as concrete, coat, chipboard, eternit, betopan, etc. inside buildings, especially as a ceiling paint.
Manner of Application
Mix well before use. Apply with brush or roller. Thin with 15-25% of water based on the application surface. Clean the dirt, oil, dust, old swelled paint which prevent from adhering on application surface. After ensuring the required dryness, start the painting process on flat surface. If the application surface is weak, thin Tek Insulating Primer Coat with 1/7 of water, apply on the surface the surface and start the painting process one day later. Wait at least for 2 hours in at least 20 °C for the second layer for double-layer painting.
Between +5 °C and 30 °C
In + 20 °C, Do not touch for: 1 hour Solid drying: 24 hours
1 liter of paint covers 7-9 m² and 1 kg of paint covers 4-6 m² on one layer (28 ± 5 mic) based on the surface.
20/1, 10/1, 3,5/1
Suitable for at least 1 year storage in its original sealed pail with the lid seals air tight and without exposure to the sunlight or freeze (between +5 °C and + 35 °C). Large packages should be stowed 5 pieces most, and small packages should be stowed 8 pieces most during the storage and transportation. Use the handles for carrying the pails.
S2 Keep out of the reach of the children. S24 Avoid contact with skin and skin. S25 Avoid contact with skin and eyes. S46 If swallowed, seek medical advice immediately and show this container or label.
Density 1,69 ± 0,05 PH 8,5 ± 0,5 Viscosity 130 ± 5 ku
High coefficient of friction Class - 3 Covering Capacity Class - 1 (4 m²/L) Brightness Class G-3 Mat Smallest Particle S-1 Resistance Against Development of Mould K-2 General Purpose