104- Atlas Water Based Silk Mat Interior Wall Paint
Availability: In stock
› Suitable for full wiping
› High water vapor permeability
› High covering capacity
› Silk bright
› Diffuses well
Water based acrylic resin based silk mat interior paint.
With its full wiping silicone and no crack feature this paint resists to dirt and stays vivid as like the first day. creates a healthy spaces with its breathing feature. Its high covering capacity lets you save time and energy.
Areas of Usage
Used on all types of construction materials such as walls, betopan, plaster, gross concrete, gas concrete, bricks interior walls with appropriate primer coat.
Manner of Application
Mix till it gets homogenous before application. cleanliness and dryness of the surface should be ensured . never apply on dirty or wet surfaces. Clean dirt, oil, dust or old paint leftovers on the application surface completely. Apply FEC Silicone Coat once dryness is ensured. if the surface is too weak or dusty, apply FEC Plaster Coat and wait for one day. Then apply FEC Silicone Covering Coat. After 8 hours, the surface is ready to paint. Wait 6 hours between the layers (25 ± 3 C°). Apply at least 2 layer. Application brush and roller.
Temperature of environment and surface should be between + 5 and 30 °C.
In an environment with the temperature of 20 °C and humidity of 60%: Touch dry: 2-4 hours. Firm dry : 24 hours. (22 ± 3 °C) Chemical resistance: 72 hours. (3 days)
1 L paint covers 10-12 m² surface as a single layer (with a 25 ± 5 mic dry film thickness) depending on the color and the application surface. 1 kg paint covers 7 - 9 m² of surface. Controlled sampling is recommended for the accurate consumption.
20/1 Pail - 10/1 3/1 Galon
It can be stored at least 2 years providing fully closed, without being exposed to sunlight and freeze (+5 ile 30 °C). Large packages should be stowed 4 pieces most, and small packages should be stowed 8 pieces most, packages should be carried by holding the carrying handle, stored in room temperature and indoor, and be protected from extreme hot and cold weather.
S2 Keep out of the reach of the children. S24 Avoid contact with skin and skin. S25 Avoid contact with skin and eyes. S46 If swallowed, seek medical advice immediately and show this container or label.
Density 1,33 ± 0,05 Solid matter % 55 % ± 5 Viscosity 90-110 ku
Brightness Class Silk Matt (30-50 gloss) Thinness degree S-1 thin Covering Capacity Power (4,5 m²/L) Water vapor permeability Class -1 Resistance Against Development of Mould K-1 General Purpose