101- Acoustic Water Based Bright Interior Wall Paint
Availability: In stock
› Solvent free
› Biocide free
› Water based
› Stain and dirt free
› Fast drying
› Low VOC
› Bright like an oil-paint
› Vivid and permanent colors
› High covering capacity
› Vivid and permanent colors
› Bright and slippery surface
› Perfect suitable for wiping and washing
› Prevents moss and bacteria development
› High water vapor permeability
› Resistant to chemicals and atmospheric conditions
Water based global, lux, Rheological/Acrylic Latex polymer binder, stain and dirt free, elastic finishing paint developed for bright interior, exterior and wooded surfaces like an oil-paint.
Water based, thinner free. Dries fast. Prevents moss, fungi and bacteria development with its high Water vapor permeability feature. Suitable for kids’ room that creates a healthy environment with its low VOC value. Biocide free, so suitable for 100% wiping and cleaning especially in kids’ room. Ideal for application in dining halls and kitchens. Suitable for application on wooden surfaces with its elastic feature. Also can be applied on hard surfaces like marble or lined metal. Unscented solvent based feature. Environment health friendly. Bright and high covering capacity. Easily applied, good
Areas of Usage
Applied on the pasted and coated surfaces like plaster, eternity, drywall or wood (properly coated interior and exterior metallic surfacesApplied on the pasted and coated surfaces like plaster, eternity, drywall or wood (properly coated interior and exterior metallic surfaces).
Manner of Application
Application on the wall with an old paint: Clean dirt, oil, dust or old paint leftovers on the application surface completely. If there is difference of level on the surface, apply proper putty. Old surfaces should be rubbed and cleanliness and dryness of the surface should be ensured. FEC Acoustic Water Based Bright Interior Paint should be applied after suitable coating is applied. Wooden Surfaces: Old paint leftovers on the application surface should be removed completely. If there is difference of level on the surface, apply proper putty. Old surfaces should be rubbed and cleanliness and dryness of the surface should be ensured. FEC Acoustic Water Based Bright Interior Paint should be applied after suitable coating is applied. In order to increase adherence on flat wooden surfaces, the surface should be rubbed with a thin rubber and dust should be cleaned. Then for to first layer applica- tion the paint should be thinned with a maximum 5% of water. For the second layer the paint is applied without thinning. A homogenous distribution should be ensured to catch a flat and equal brightness. Also the paint should be applied with a great attention. Wait at least 5-6 hours between layers. 2 layers of application are recommended. Physical resistance time is one week and chemical resistance time is 28 days. - In very hot and windy weather conditions it is recom- mended to be careful about too much rippling in order to prevent brush and roller traces. - To increase adherence the surface is recommended to be rubbed. Then the application starts. Mix well before application. Apply with a brush, roller or paint gun. Dirty apparatus should be washed with water before use.
Both the open-air temperature and temperature of the application surface should be between +5 °C to +30 °C.
At +20 °C, with 60% humidity. Do not touch for: 1-3 hours. Solid dry: 24 hours. Necessary dryness for chemicals: 28 days.
Dry film thickness (35 ± 5 µ) 75 gr/m². 1 L paint for a single layer application covers 10-16 m², with the second layer application it is 8 m²/L. Controlled application should be realized for definite consumption.
15 - 7,5 - 2,5L
Standart color chart
Suitable for at least 2 years storage in its original sealed pail with the lid seals air tight and without exposure to the sunlight or freeze (between+5 °C and + 35 °C). Large packages should be stowed 5 pieces most, and small packages should be stowed 8 pieces most during the storage and transportation. Use the handles for carry- ing the packages. Store at room temperature, protect from extreme cold or hot.
S2 Keep out of the reach of the children. S24 Avoid contact with skin and skin. S25 Avoid contact with skin and eyes. S46 If swallowed, seek medical advice immediately and show this container or label.
Density 1,2 gr/ml Solid matter (%) % 50 Volume (%) % 38 PH 9
Brightness Class 75 ± 5 Gloss (85° angle) 60 ± 5 Gloss (60° angle) Dry film thickness E2 Smallest particle S1 Water vapor permeability V1 High Water transmission W-3 Low Covering Capacity Class-2 (7-8 m²/L) YOD Class-1